What Caused Secession Essay Example for Free

What Caused Secession Essay With no doubt was the secession of the eleven southern states a very important event in our country’s history. Resulting in Civil War, which lasted four years, leaving over one-half million deaths, destruction, and great sectional hatred, has affected our country till today. The great question is what caused the southern states to secede? If slavery truly was the culprit behind this, if it was to what extent was it? Was the person leading our country at the time in fault for southern secession? If any what were other factors? All of these questions are still debated today. Southern believed that slaves were their property, and that they had the right to take them with them. So when they noticed that Lincoln was going to abolish slavery they decided it would be best to secede than not have anything to make money from. After the compromise of 1820 they limited slavery to the south, which would split the country into two for the next forty years. The South would feel that slavery was the best thing for the slave for it gave them something productive to do. The North however as a majority felt slavery as a horrible thing by the cruel ways the slave owners would treat and beat their slaves. There were also those who went and helped free and bring slaves up to the North and also into Canada. (Document 1). Lincoln promising to abolish slavery played a big role on secession. Southerners economy depended on agriculture, and cotton was one of their major crops. So they needed slaves to work in their fields. When they heard that Lincoln would abolish slavery they thought â€Å"If Lincoln were president†¦the Union would be endangered from that hour.† (Document 3). The South started to think that it is â€Å"Better leave the Union in the open face of day, than be lighted from it at midnight by the [arsonist’s] torch.† (Document 2) They also said that â€Å"All citizens of the United States have an equal right to settle with their property in the Territory, without their rights, either of person or property, being†¦impaired†¦Ã¢â‚¬  â€Å"It opened our eyes to the fact that there were two hostile elements in the country, and that if we allowed slaves to enter any territorial acquisition, our free labor must be excluded from it.† (Document 5) They argued about this for a reasonable time until the south eventually seceded from the south. We really don’t know what really caused secession. Even researchers can’t solidly say what the cause of secession was. But people can infer, and with clues, can have an idea of what caused secession.

Misunderstandings in Culturally Diverse Workplaces Essay -- social iss

This essay will explain issues that occur in culturally diverse workplaces and describe how personal conceptions may contribute to misunderstandings when working with others in culturally diverse workplaces. This essay will also discuss the impact of cultural differences when conflict occurs and it will give suggestions on how to resolve and manage this conflict. An explanation of who to discuss the conflict with in a work environment will also be discussed in this essay. The issues that arise in a culturally diverse workplace need to be known and identified by counsellors to ensure they are aware of any obstacle forming. Cross-cultural conflict can arise from a range of issues. These issues include language barriers, customs, roles and status, differences in non-verbal behaviour, personal space, appearance, gender, religion and responses to authority (Open Colleges, 2012, p.47-49). While working as a professional in a multi-cultural country it is important for counsellors to understand the influence these issues can have on relationships in the workplace with both clients and colleagues. Fontes states, when the client and counsellor come from different cultures, obtaining correct basic demographic information can be challenging due to atypical family configurations, facts that have been lost or changed in the process of immigration and lying (2008, p.282). These issues may be overcome with honesty and confidence once the counsellor and client have strong rapport. It is important for counsellors to understand their own cultural concepts and how they may contribute to conflict when working with others. As a young female, I understand that in many cultures I would be recognised as incompetent and unhelpful. However, by using le... ...of how to resolve it successfully. A reflection on my own cultural concepts has enabled me to understand how personal values and beliefs may contribute to misunderstandings when working with others and how the impact of cultural differences can affect conflict. It has also explained where to get assistance if needed if conflict arose. This information will be used in my work when counselling clients from a different cultural background. Works Cited Open Colleges (2012) Student Workbook: Work within a structured counselling framework. Open Colleges Sydney, Australia Geldard, D., and Geldard, K. (2012) Basic Personal Counselling: A training manual for counsellors (7th Ed.) Frenchs Forest: Pearson Education Australia Fontes, Lisa Aronson, May 23, 2008, Interviewing Clients across Cultures: A Practitioner's Guide Guilford Press, New York, ISBN: 9781606230534

Dishonest salespeople and gossip Essay

No matter what culture one belongs, common observation shows that women â€Å"gossip† while men â€Å"talk shop†; women are â€Å"bossy† and men are â€Å"firm† (Women’s Language, 2005). However, even if common observation shows that women talk more than men, research findings prove otherwise. In fact, findings would even show that â€Å"men have been shown to talk more than women in settings as diverse as staff meetings, television panel discussions and husband-and-wife pairs in spontaneous conversation† (Women’s Language, 2005). As men tend to talk about â€Å"male things† like politics, sports, cars, women talk about the â€Å"women things† such as child-rearing, household chores and some personal relationships. According to Pamela Fishman’s research studies, women are relatively weak in interactive situations because they tend to â€Å"exploit questions and answers in order to force a response and keep the conversation going† (Women’s Language, 2005). Therefore, â€Å"gossiping† is common and universal. People always love to hear something about the other person who is not on the scene of conversation. What about dishonest salespeople? (rhetorical question) Are these people more disgusting than those who gossip? Looking at the gravity of damage which one causes more harm?   Looking at the gravity between the results, which causes greater damage? Looking at the gravity of the situation, it seems that gossiping is the most destructive trait here. (parallelism). But of course, people will not discount the fact that dishonesty in sales is also a bad trait. For one, not all incidents of dishonesty are detected and not all detected cases are reported. Therefore any fraud statistic is an estimate. Nevertheless, the statistics make it clear that dishonesty in salespeople occurs frequently, and no organization is immune (Peterson & Zikmund, 2004). The costs of fraud and dishonesty will continue to rise unless auditors, management, and the general public become more proactive in learning about the types of fraud, the perpetrators and valuable fraud prevention and detection techniques (Bezanis, 2002). It is important to be able to know the difference between the real and spurious products in order to maintain the good image of that company. Fraud is conventionally defined as â€Å"intentional deception, deceitful pretenses, or deliberate trickery to gain an advantage† (Hanlin, 2004). Fraud encompasses an array of irregularities and illegal acts characterized by intentional deception. Every fraud involves three elements: (1) theft act, (2) concealment, and (3) conversion (Albrecht & Albrecht, 2001). For instance, buyers who get the misfortune of buying fake Gucci bags are able to identify the fake product because of the flimsy hardware, cheap leather and misspelled logos. The fake bags are so like the originals that it is hard to spot them quickly. There are businessmen who are able to copy the smart way. High-end label bags cost around $500 to over $1,000. Anything less than these price ranges are fake. Buyers are also encouraged to read the fine print so that they do not buy those that says, â€Å"Designer Inspired.† The numerous issues which plague the business sector with allegations and prosecution of unethical conduct easily fall under either the definition of fraud or unfair and deceptive practices. Or if the issue does not fit with the two terms, it can fall under unethical business conduct. The unethical conduct is a catchall phrase that includes fraud and unfair practice and other aspects beyond the scope of the two terms. In the same manner, gossip is also an unethical business indulged by people regarding other people. However, gossip causes hurt. It can hurt people and damage lives. Thus, gossip, depending on the seriousness can be extremely dangerous too. It can damage a person’s reputation and image. In the long run, gossip seems to be more damaging than dishonest salespeople because one can always return a fake product. But the destruction one causes in gossip spreads like wildfire and cannot be restored. As defined, ethical business conduct is doing something that is not required by law, contract, or other obligation and which is a positive contribution to society. Therefore, a contrary conduct is unethical. This means doing something which is prohibited by law, contract, or other obligation or which has a negative contribution to society. Contribution to society is now part of the definition because ethical business conduct has evolved into what is termed as corporate and social responsibility. An act of the company has a vast effect on the society as a whole. In the course of human interactions, there are many situations in which it is difficult to make a decision because values come into conflict. It is essential that an individual or an organization engage in values clarification to develop a personal decision-making process that fosters ethical behavior.

Essay on A Christmas Carol by Charles Dickens - 3534 Words

A Christmas Carol by Charles Dickens Introduction Charles Dickens was born in Landport, Hampshire, in 1812 and died in 1870. His father was a clerk in the navy pay office and family life was occasionally hard, especially when his father had to go to the debtors prison. The young twelve year old Charles became the main money-maker in the family at this time and worked in a blocking factory. Charles father was released a year later and Charles was able to go to school. After school he became a clerk for solicitors, later becoming a journalist, a reporter at Doctors Commons and at 22 joined a London newspaper. He published various papers in the Monthly Magazine, following this up with sketches and articles for the†¦show more content†¦Charles wrote A Christmas Carol in 1843. This short novel has a Christmas theme and has been popular since it was first published. This moral story is about an old man called Scrooge who hates Christmas and is mean to everyone, but he is transformed. The lessons he learns are as much for the reader to benefit from as Scrooge. His transformation is the key event in the novel and the reader clearly sees Scrooge before and after his experiences. This process will now be explored more fully. A Christmas Carol, by Charles Dickens When we first meet Scrooge he is described as a cold-hearted, selfish, evil man. He was a Tight-fisted hand at the grindstone, A squeezing, wrenching, grasping, scraping, clutching, covetous old sinner!. He is also described as a very cold man, A frosty rime was on his head, on his eyebrows and on his wiry chin. He carried his own temperature always about with him. The reader gets the impression that whenever somebody may walk past him they would shiver or shudder. When the reader thinks of cold they may think of chilly or they may think symbolically of cold in a person, as in no passion or feeling. When other people meet Scrooge their reaction was to avoid talking to him, nobody asked him even for a little amount of money or what the time was. This was because they knew his answer would be a negative one. Perhaps they thought that if they ignored Scrooge he would go away. It seems as ifShow MoreRelatedCharles Dickens and A Christmas Carol1613 Words   |  7 PagesCharles Dickens and A Christmas Carol: Famed British author, Charles Dickens was born on February 7, 1812, in Portsmouth, England. He was the second of eight children, living in a poor neighborhood in London. His parents were John Dickens, a naval clerk, who always lived beyond his means. Married to his mother Elizabeth Dickens, who aspired to be a teacher and a school director. Dickens went to William Giles’ school in Chatham, Kent, for approximately one year before his father’s money habitsRead MoreA Christmas Carol By Charles Dickens1139 Words   |  5 Pages The book I have chosen is A Christmas Carol by Charles Dickens. It has been rewrote few times but I wanted to pick the author that started it all. Charles John Huffman Dickens lived from February 7th,1812 – June 9th,1970 making him 58 when he died. He was buried Westminster Abbey. His mother and father were John and Elizabeth Dickens. He had seven siblings four brothers and three sisters. During his life he was married to his wife Catherine Dickens from 1836 to the day he died. Together they hadRead MoreA Christmas Carol (Charles Dickens)1144 Words   |  5 PagesCharles Dickens believed it was up to him to inform the people of Britain of the social problems occurring around Britain. While Dickens was a young man, he suffered from poverty along with his mother and father. His father was imprisoned for dept and Charles wanted to become a social reformer. Dickens used these problems as themes for his book ‘A Christmas Carol. These themes involve poverty, pollution and a c hanging of ways. Dickens used Scrooge, the main character in the book at first to showRead MoreA Christmas Carol By Charles Dickens1160 Words   |  5 PagesCharles Dickens began writing the famous story â€Å"A Christmas Carol† in October 1843 and wrote excitedly during the next six weeks. He completed the narrative at the end of November so that it could be published by the time it was Christmas. It came out on December 17, 1843 and sold out in only three days (Molly Oldfield). The expression â€Å"Bah! Humbug†, a line repeated many times in the story by its main character, a miserable and bitter fellow by the name of Ebenezer Scrooge, has become a well-knownRead MoreCharles Dickens A Christmas Carol Essay922 Words   |  4 Pages â€Å"Bah, humbug!† This well-known phrase is popular thanks to Charles Dickens’ A Christmas Carol. In this literary classic, Dickens tells the story of Ebenezer Scrooge, a â€Å"tight fisted...covetous old sinner† (12). Through a series of hauntings by various Christmas ghosts, Scrooge realizes the error of his ways and changes completely into a warm-hearted, generous man. Scrooge’s tale is a familiar one; countless movies have been filmed, plays have been produced, and references made in other storiesRead MoreCharles Dickens A Christmas Carol1316 Words   |  6 PagesIt can be easily depicted that Christmas is a time of the year to share joyfulness. In Charles Dickens’ A Christmas Carol, Ebenezer Scrooge is a character that is effortlessly described as a hardheaded cold man. It is simple to judge the character of Scrooge in this manner, but it is important to recognize the change in his personality throughout the story. Scrooge’s transformation happens very quickly, but he becomes generous and caring only when he is forced to see himself through a stranger’sRead MoreA Christmas Carol By Charles Dickens1293 Words   |  6 PagesCharles Dickens presents many sh ort stories and novels. He is greatly known for his short fiction and later theater play, â€Å"A Christmas Carol†. In one short story, a reader could describe it as Charles â€Å"other† Christmas story, an elderly narrator reminisce of holiday past. There is a range of appeal in the story itself from comforting memories of loved toys to leaving the reader with an eerie feeling of various childhood haunts. The reader’s analysis of Dickens use of vivid detail together with hisRead MoreA Christmas Carol By Charles Dickens1331 Words   |  6 PagesChristy Mak 12/21/15 Period three Scrooge Changes In the story, A Christmas Carol, by Charles Dickens, Scrooge is the main character. In the beginning of the story, he is shown as an old miser counting and gripping his money in the counting house. Later on, Scrooge’s dead business partner, Marley, has visited Scrooge from the grave while being bounded in chains to warn Scrooge to change his ways or suffer the same fate. Soon, three ghosts are sent to visit Scrooge to show him scenes thatRead MoreA Christmas Carol By Charles Dickens914 Words   |  4 PagesFew characters in Christmas literature personify the antithesis of the season like Ebenezer Scrooge. Penned in 1843, Charles Dickens classic, A Christmas Carol has been told and retold. It has become a fixture of the season. So ingrained in our culture, is this story, that everyone knows the name Scrooge and the negative connotation that accompanies it. But what if, instead of just a cranky old miser, Ol Ebenezer Scrooge was more of a rather observant social commenta tor? In order to defendRead MoreThe Life Of Charles Dickens A Christmas Carol1062 Words   |  5 Pageslasted from 1832 to 1901 under Queen Victoria’s reign. The culture revealed in this era was a time of rapid change, social inequality, industrialization, supernatural and religious beliefs, and was accurately reflected in the works of Charles Dickens, A Christmas Carol. Roles of men and women were strictly defined, as were economic statuses. The hustle and bustle of the streets led to illnesses. Working conditions were destitute and unsanitary. Children often had little to no education, unless very

Gay Marriage And Equality An Ethical Issue - 1289 Words

Gay marriage and equality is an ethical issue that has been debated for years. This is an issue that will continue to be debated until a clear answer as to why it is not socially acceptable is determined. A deontological view has been traditionally applied to the subject of gay marriage and equality. Those who are opposed to same sex marriage take on this view. People do not think that a deontological view will solve the issue of whether same sex marriage is right or wrong. However, people who feel this, will bring a new idea to the situation that will assist in giving us an understanding of why it is important that we respect the needs and wants of those who are in same sex relationships, and allow gay marriage and equality. Homosexuals†¦show more content†¦Members of the LGBT community write â€Å"In arguing that sexual orientation and gender identity are innate and cannot be consciously changed, attempts to change gay, lesbian, and bisexual people into heterosexuals, cal led reparative therapy are generally opposed (Sullivan 1997).† Many officials of the scientific world, such as the Attorney General of the United States, states while sexual orientation carries no visible badge, a growing scientific consensus accepts that sexual orientation is a characteristic that is immutable.† This statement, made in 2011, was one that impacted the country. Before this time, many believed that homosexualty was a choice. Even the American Psychiatric Association condemns the use of reparative therapy saying that to use reparative therapy, the disease has to be a mental one. Homosexuality is not a mental disease, and scientists have yet to find out.. Scientists have gathered that homosexuality is a combination of genetic, hormonal, and social factors. Homosexuals have undergone hatred, discrimination, and inequality for decades. Just like the African Americans in the 1900’s, homosexuals are human beings, and they need to be treated as such. Mean ing that homosexuals deserve equal rights, deserve to be able to get married, and they deserve to have the same chances in this society as heterosexual people do. Hatred that the homosexual community has faced belongs mostly to

Analysis Of `` Daddy `` By Sylvia Plath - 1210 Words

Sylvia Plath had turbulent and unstable life leading up to her suicide. Her father died when she was very young, although he held considerable weight in her poetry. Sylvia even dedicated an entire poem, titled â€Å"Daddy†, to her thoughts and feelings about her deceased father. Ted Hughes, her husband, also proved to be a large influence in much of her work, and also helped shape her ideas of feminism and motherhood. He was also referenced in the poem â€Å"Daddy†, along with many other poems. Depression and mental illness was another major factor in her work. She wrote about it heavily in her diary and especially the poems she wrote towards the end of her life. Sylvia Plath’s poetry is in large part shaped by her relationship with her father, her†¦show more content†¦Plath won a Pulitzer prize in 1982, making her the only person to win this award posthumously. Sylvia Plath’s father, Otto, was a huge influence in her work, especially in her poem â€Å"Daddy†. Otto wasn’t alive for too long for Sylvia’s life, but he still left a huge impact on her life and her work. Many of her views of men and Germans - her father was an immigrant from Germany - were based on her interactions with Otto. In ‘Daddy’, she tells her father â€Å"You do not do, you do not do / Any more, black shoe / In which I have lived like a foot / For thirty years, poor and white, / Barely daring to breathe or Achoo.†(eyayuf #). This shows how scared and small the felt around her father. She felt as if she lived in a â€Å"black shoe†, emphasizing how powerless and tiny she felt. â€Å"For thirty years†, she has lived an afraid and anxious life. She also tells her dad that â€Å"I have had to kill you You died before I had time——†. Her father died when she was around the age of eight, but even so, he left a lasting enough impression to cause such an amount of hatred and disgust from Sylvia. She also called him â€Å"a bag full of God†, which paints him as a powerful authoritative figure. She also felt like she could â€Å"never could talk to you. The tongue stuck in my jaw.† This only furthers the emotions she felt about her father. She was too scared to say anything. Her father was a powerful, authoritative figure that she has felt an extreme hatred for her entire life. Sylvia Plath’sShow MoreRelatedEssay Analysis of Daddy by Sylvia Plath572 Words   |  3 PagesAnalysis of Daddy by Sylvia Plath Sylvia Plath uses her poem, Daddy, to express deep emotions toward her father’s life and death. With passionate articulation, she verbally turns over her feelings of rage, abandonment, confusion and grief. Though this work is fraught with ambiguity, a reader can infer Plath’s basic story. Her father was apparently a Nazi soldier killed in World War II while she was young. Her statements about not knowing even remotely where he was while he was in battleRead MoreEssay on Analysis of Daddy by Sylvia Plath1923 Words   |  8 PagesAnalysis of Daddy by Sylvia Plath In the poem â€Å"Daddy,† Sylvia Plath describes her true feelings about her deceased father. Throughout the dialogue, the reader can find many instances that illustrate a great feeling of hatred toward the author’s father. She begins by expressing her fears of her father and how he treated her. Subsequently she conveys her outlook on the wars being fought in Germany. She continues by explaining her life since her father and how it has related to him. In theRead MoreAnalysis Of `` Daddy `` By Sylvia Plath905 Words   |  4 PagesImagine growing up with a father so cruel, he haunts you far beyond his death. Well, in the poem Daddy, this nightmare is a reality. The speaker of the poem is nearly 30 years old before she can finally put her demons to rest. Her father has left her in ruins, unable to maintain a healthy mind or a stable life. Sylvia Plath paints this vivid picture of this nightmare using a number of allusions. While Plath begins the poem with childish, innocent allusions, she soon switches to horrid references ofRead MoreAnalysis Of Daddy By Sylvia Plath1435 Words   |  6 PagesDaddy’ by Sylvia Plath is a poem that explores the persona of a 40-year-old woman whose father died when she was 10. Despite the fact that Plath denied that it was in anyway autobiographical, the reader cannot fail to notice the similarities between the life of the persona and Plath. Throughout the poem we are faced which a strain of imagery; imagery which shows the personas extreme anger through connotations to being in a concentration camp: â€Å"Chuffing me off like a Jew. A Jew to Dachau, AuschwitzRead MoreDaddy Sylvia Plath Analysis763 Words   |  4 PagesThis idea was clearly incorporated into Sylvia Plath’s poem Daddy. Through Plath’s life she despised her father. â€Å"Seven years, if you want to know† (74). Plath even compares him to a Nazi at one point in the poem, â€Å"I thought every German was you† (Pg. 29). Even though the Nazi period was not during the time of Daddy’s publishing date to associate the amount of hatred she had for her father Plath compares him to the worst person she could think of, a Nazi. Plath conveys the fact that when people dieRead MoreAnalysis Of The Poem Daddy By Sylvia Plath843 Words   |  4 PagesThe poem â€Å"Daddy† by Sylvia Plath is dark and descriptive to the reader. This poem is about a father and daughter. The speaker refers to her father as â€Å"Daddy†, throughout the poem. It is inferred that the speaker does not ha ve a good relationship with her father and is troubled by this. The speaker uses many descriptions and comparisons to describe her feelings all through the poem. At the beginning of the poem, the speaker compares her life as to living in a black shoe. Just by the description ofRead MoreAnalysis Of Sylvia Plath s Daddy 850 Words   |  4 PagesSylvia Plath’s poem â€Å"Daddy† a sixteen five-line stanza is about Plath’s father and the darkness and brutality of male dominance. Plath incorporates a very dark and meaningful storyboard to describe her feelings towards her father. Creating a figurative image for the readers, in second person, it is clearly understood that she is unhappy to be alive. Sylvia Plath’s use of various elements of poetry dramatizes her internal battle with societal patriarchy and male dominance. The use of metaphors inRead MoreAnalysis Of Sylvia Plath s Daddy And Lady Lazarus 931 Words   |  4 PagesSylvia Plath lived from 1932-1963, dying at the age of 30. In her short life, however, she witnessed World War Two and the Cold War. Both of these events inimitably influenced her life and writ ing style, which can be observed in her works â€Å"Daddy† and â€Å"Lady Lazarus†, where she uses Holocaust imagery to draw connections between her life and the lives of the Jewish people held captive in concentration camps. Through her use of imagery she tackles personal and political issues encapsulating feelingsRead MoreEssay on A Womans Struggle 1373 Words   |  6 PagesA Woman’s struggle Analysis The plague of male dominancy and female oppression has spread throughout time and cultures like a pandemic infection, targeting women. Sylvia Plath’s â€Å"Daddy† and Janice Mirikitani’s â€Å"Suicide Note,† show the struggle and pain that oppressive forces perpetrated on women. Although, both speakers are oppressed the way they end the oppression and the cause of it are very different. Patriarchy has always existed, and it affects women all over the world. For example, bannedRead More An Analysis of Sylvia Plaths Poem, Daddy Essay793 Words   |  4 PagesAn Analysis of Sylvia Plaths Poem, Daddy Sylvia Plaths famous poem Daddy seems to refer quite consistently to her deceased father (and obliquely to her then estranged husband Ted Hughes) by use of many references that can clearly be associated with the background of Otto Plath, emphasizing his German heritage. These include the Polish town where Otto was born, the atrocities of the German Nazis in the Second World War (Dachau, Auschwitz, Belsen), the Luftwaffe, and even the professorial

3 D Optical Storage Free Essays

string(130) " has been carried out in solving the problems associated with the optical systems required for the reading and recording of data\." 3-D OPTICAL DATA STORAGE TECHNOLOGY * *ABSTRACT 3D optical data storage is the term given to any form of optical data storage in which information can be recorded and/or read with three dimensional resolution (as opposed to the two dimensional resolution afforded, for example, by CD). Current optical data storage media, such as the CD and DVD store data as a series of reflective marks on an internal surface of a disc. In order to increase storage capacity, it is possible for discs to hold two or even more of these data layers, but their number is severely limited since the addressing laser interacts with every layer that it passes through on the way to and from the addressed layer. We will write a custom essay sample on 3 D Optical Storage or any similar topic only for you Order Now These interactions cause noise that limits the technology to approximately 10 layers. 3D optical data storage methods circumvent this issue by using addressing methods where only the specifically addressed voxel (volumetric pixel) interacts substantially with the addressing light. This necessarily involves nonlinear data reading and writing methods, in particular non linear optics. 3D optical data storage is related to (and competes with) holographic data storage. Traditional examples of holographic storage do not address in the third dimension, and are therefore not strictly â€Å"3D†, but more recently 3D holographic storage has been realized by the use of microholograms. Layer-selection multilayer technology (where a multilayer disc has layers that can be individually activated e. g. electrically) is also closely related. This innovation has the potential to provide terabyte-level mass storage on DVD-sized disks. Data recording and readback are achieved by focusing lasers within the medium. However, because of the volumetric nature of the data structure, the laser light must travel through other data points before it reaches the point where reading or recording is desired. Therefore, some kind of nonlinearity is required to ensure that these other data points do not interfere with the addressing of the desired point. 1. Overview: Current optical data storage media, such as the CD and DVD store data as a series of reflective marks on an internal surface of a disc. In order to increase storage capacity, it is possible for discs to hold two or even more f these data layers, but their number is severely limited since the addressing laser interacts with every layer that it passes through on the way to and from the addressed layer. These interactions cause noise that limits the technology to approximately 10 layers. 3D optical data storage methods circumvent this issue by using addressing methods w here only the specifically addressed voxel (volumetric pixel) interacts substantially with the addressing light. This necessarily involves nonlinear data reading and writing methods, in particular nonlinear optics. 3D optical data storage is related to (and competes with) holographic data storage. Traditional examples of holographic storage do not address in the third dimension, and are therefore not strictly â€Å"3D†, but more recently 3D holographic storage has been realized by the use of microholograms. Layer-selection multilayer technology (where a multilayer disc has layers that can be individually activated e. g. electrically) is also closely related. Schematic representation of a cross-section through a 3D optical storage disc (yellow) along a data track (orange marks). Four data layers are seen, with the laser currently addressing the third from the top. The laser passes through the first two layers and only interacts with the third, since here the light is at a high intensity. As an example, a prototypical 3D optical data storage system may use a disk that looks much like a transparent DVD. The disc contains many layers of information, each at a different depth in the media and each consisting of a DVD-like spiral track. In order to record information on the disc a laser is brought to a focus at a particular depth in the media that corresponds to a particular information layer. When the laser is turned on it causes a photochemical change in the media. As the disc spins and the read/write head moves along a radius, the layer is written just as a DVD-R is written. The depth of the focus may then be changed and another entirely different layer of information written. The distance between layers may be 5 to 100 micrometers, allowing 100 layers of information to be stored on a single disc. In order to read the data back (in this example), a similar procedure is used except this time instead of causing a photochemical change in the media the laser causes fluorescence. This is achieved e. g. by using a lower laser power or a different laser wavelength. The intensity or wavelength of the fluorescence is different depending on whether the media has been written at that point, and so by measuring the emitted light the data is read. It should be noted that the size of individual chromophore molecules or photoactive color centers is much smaller than the size of the laser focus (which is determined by the diffraction limit). The light therefore addresses a large number (possibly even 109) of molecules at any one time, so the medium acts as a homogeneous mass rather than a matrix structured by the positions of chromophores. 2. History: The origins of the field date back to the 1950s, when Yehuda Hirshberg developed the photochromic spiropyrans and suggested their use in data storage. [3] In the 1970s, Valeri Barachevskii demonstrated that this photochromism could be produced by two-photon excitation, and finally at the end of the 1980s Peter T. Rentzepis showed that this could lead to three-dimensional data storage. [5] This proof-of-concept system stimulated a great deal of research and development, and in the following decades many academic and commercial groups have worked on 3D optical data storage products and technologies. Most of the developed systems are based to some extent on the original ideas of Rentzepis. A wide range of physical phenomena for data reading and recording have been investigated, large numbers of chemical systems for the medium have been developed and evaluated, and extensive work has been carried out in solving the problems associated with the optical systems required for the reading and recording of data. You read "3 D Optical Storage" in category "Papers" Currently, several groups remain working on solutions with various levels of development and interest in commercialization. *3. Processes for creating written data*: Data recording in a 3D optical storage medium requires that a change take place in the medium upon excitation. This change is generally a photochemical reaction of some sort, although other possibilities exist. Chemical reactions that have been investigated include photoisomerizations, photodecompositions and photobleaching, and polymerization initiation. Most investigated have been photochromic compounds, which include azobenzenes, spiropyrans, stilbenes, fulgides and diarylethenes. If the photochemical change is reversible, then rewritable data storage may be achieved, at least n principle. Also, multilevel recording, where data is written in ‘grayscale’ rather than as ‘on’ and ‘off’ signals, is technically feasible. 3. 1 Writing by non*-*resonant multiphoton absorption Although there are many nonlinear optical phenomena, only multiphoton absorption is capable of injecting into the media the significant energy required to electronically excite molecular species and cause chemical reactions. Two-photon absorption is the strongest multiphoton absorbance by far, but still it is a very weak phenomenon, leading to low media sensitivity. Therefore, much research has been directed at providing chromophores with high two-photon absorption cross-sections. Two photon absorption (TPA) is the simultaneous absorption of two photons of identical or different frequencies in order to excite a molecule from one state (usually the ground state) to a higher energy electronic state. The energy difference between the involved lower and upper states of the molecule is equal to the sum of the energies of the two photons. Two-photon absorption is a second-order processes several orders of magnitude weaker than linear absorption. It differs from linear absorption in that the strength of absorption depends on the square of the light intensity, thus it is a nonlinear optical process Writing by 2-photon absorption can be achieved by focusing the writing laser on the point where the photochemical writing process is required. The wavelength of the writing laser is chosen such that it is not linearly absorbed by the medium, and therefore it does not interact with the medium except at the focal point. At the focal point 2-photon absorption becomes significant, because it is a nonlinear process dependent on the square of the laser fluence. Writing by 2-photon absorption can also be achieved by the action of two lasers in coincidence. This method is typically used to achieve the parallel writing of information at once. One laser passes through the media, defining a line or plane. The second laser is then directed at the points on that line or plane that writing is desired. The coincidence of the lasers at these points excited 2-photon absorption, leading to writing photochemistry. 3. 2 Writing by sequential multiphoton absorption Another approach to improving media sensitivity has been to employ resonant wo-photon absorption (also known as â€Å"1+1† or â€Å"sequential† 2-photon absorbance). Nonresonant two-photon absorption (as is generally used) is weak since in order for excitation to take place, the two exciting photons must arrive at the chromophore at almost exactly the same time. This is because the chromophore is unable to interact with a single photon alone. However, if the chromophore has an ene rgy level corresponding to the (weak) absorption of one photon then this may be used as a stepping stone, allowing more freedom in the arrival time of photons and therefore a much higher sensitivity. However, this approach results in a loss of nonlinearity compared to nonresonant 2-photon absorbance (since each 1-photon absorption step is essentially linear), and therefore risks compromising the 3D resolution of the system. 3. 3 Microholography In microholography, focused beams of light are used to record submicrometre-sized holograms in a photorefractive material, usually by the use of collinear beams. The writing process may use the same kinds of media that are used in other types of holographic data storage, and may use 2-photon processes to form the holograms. . 4 Data recording during manufacturing Data may also be created in the manufacturing of the media, as is the case with most optical disc formats for commercial data distribution. In this case, the user cannot write to the disc – it is a ROM format. Data may be written by a nonlinear optical method, but in this case the use of very high power lasers is acceptable so media sensitivity becomes less of an issue. The fabrication of discs containing data molded or printed into their 3D structure has also been demonstrated. For example, a disc containing data in 3D may be constructed by sandwiching together a large number of wafer-thin discs, each of which is molded or printed with a single layer of information. The resulting ROM disc can then be read using a 3D reading method. 3. 5 Other approaches to writing Other techniques for writing data in three-dimensions have also been examined, including: Persistent *spectral** **hole burning* (PSHB), which also allows the possibility of spectral multiplexing to increase data density. However, PSHB media currently requires extremely low temperatures to be maintained in order to avoid data loss. Void* formation, where microscopic bubbles are introduced into a media by high intensity laser irradiation. [7] Chromophore poling, where the laser-induced reorientation of chromophores in the media structure leads to readable changes. *4. Processes for reading data*: The reading of data from 3D optical memories has been carried out in many different ways. While some of these rely on the nonlinearity of the light-matter interaction to obtain 3D resolution, others use methods that spatially filter the media’s linear response. Reading methods include: Two photon absorption (resulting in either absorption or fluorescence). This method is essentially two-photon-microscopy. Linear excitation of fluorescence with confocal detection. This method is essentially confocal laser scanning microscopy. It offers excitation with much lower laser powers than does two-photon absorbance, but has some potential problems because the addressing light interacts with many other data points in addition to the one being addressed. Measurement of small differences in the refractive index between the two data states. This method usually employs a phase contrast microscope or confocal reflection microscope. No absorption of light is necessary, so there is no risk of damaging data while reading, but the required refractive index mismatch in the disc may limit the thickness (i. e. number of data layers) that the media can reach due to the accumulated random wavefront errors that destroy the focused spot quality. Second harmonic generation has been demonstrated as a method to read data written into a poled polymer matrix. Optical coherence tomography has also been demonstrated as a parallel reading method. *5. Media *design: The active part of 3D optical storage media is usually an organic polymer either doped or grafted with the photochemically active species. Alternatively, crystalline and sol-gel materials have been used. 5. 1 Media form factor Media for 3D optical data storage have been suggested in several form factors: Disc. A disc media offers a progression from CD/DVD, and allows reading and writing to be carried out by the familiar spinning disc method. Card. A credit card form factor media is attractive from the point of view of portability and convenience, but would be of a lower capacity than a disc. Crystal, Cube or Sphere. Several science fiction writers have suggested small solids that store massive amounts of information, and at least in principle this could be achieved with 3D optical data storage. 5. 2 Media manufacturing The simplest method of manufacturing – the molding of a disk in one piece – is a possibility for some systems. A more complex method of media manufacturing is for the media to be constructed layer by layer. This is required if the data is to be physically created during manufacture. However, layer-by-layer construction need not mean the sandwiching of many layers together. Another alternative is to create the medium in a form analogous to a roll of adhesive tape. *6. Drive design*: A drive designed to read and write to 3D optical data storage media may have a lot in common with CD/DVD drives, particularly if the form factor and data structure of the media is similar to that of CD or DVD. However, there are a number of notable differences that must be taken into account when designing such a drive, including: Laser. Particularly when 2-photon absorption is utilized, high-powered lasers may be required that can be bulky, difficult to cool, and pose safety concerns. Existing optical drives utilize continuous wave diode lasers operating at 780 nm, 658 nm, or 405 nm. 3D optical storage drives may require solid-state lasers or pulsed lasers, and several examples use wavelengths easily available by these technologies, such as 532 nm (green). These larger lasers can be difficult to integrate into the read/write head of the optical drive. Variable spherical aberration correction. Because the system must address different depths in the medium, and at different depths the spherical aberration induced in the wavefront is different, a method is required to dynamically account for these differences. Many possible methods exist that include optical elements that swap in and out of the optical path, moving elements, adaptive optics, and immersion lenses. Optical system. In many examples of 3D optical data storage systems, several wavelengths (colors) of light are used (e. g. eading laser, writing laser, signal; sometimes even two lasers are required just for writing). Therefore, as well as coping with the high laser power and variable spherical aberration, the optical system must combine and separate these different colors of light as required. Detection. In DVD drives, the signal produced from the disc is a reflection of the addressing laser beam, and is therefore very intense. For 3D optical storage however, the signal mus t be generated within the tiny volume that is addressed, and therefore it is much weaker than the laser light. In addition, fluorescence is radiated in all directions from the addressed point, so special light collection optics must be used to maximize the signal. Data tracking. Once they are identified along the z-axis, individual layers of DVD-like data may be accessed and tracked in similar ways to DVD discs. The possibility of using parallel or page-based addressing has also been demonstrated. This allows much faster data transfer rates, but requires the additional complexity of spatial light modulators, signal imaging, more powerful lasers, and more complex data handling. *7. Development issues*: Despite the highly attractive nature of 3D optical data storage, the development of commercial products has taken a significant length of time. This results from limited financial backing in the field, as well as technical issues, including: Destructive reading. Since both the reading and the writing of data are carried out with laser beams, there is a potential for the reading process to cause a small amount of writing. In this case, the repeated reading of data may eventually serve to erase it (this also happens in phase change materials used in some DVDs). This issue has been addressed by many approaches, such as the use of different absorption bands for each process (reading and writing), or the use of a reading method that does not involve the absorption of energy. Thermodynamic stability. Many chemical reactions that appear not to take place in fact happen very slowly. In addition, many reactions that appear to have happened can slowly reverse themselves. Since most 3D media are based on chemical reactions, there is therefore a risk that either the unwritten points will slowly become written or that the written points will slowly revert to being unwritten. This issue is particularly serious for the spiropyrans, but extensive research was conducted to find more stable chromophores for 3D memories. Media sensitivity. 2-photon absorption is a weak phenomenon, and therefore high power lasers are usually required to produce it. Researchers typically use Ti-sapphire lasers or Nd:YAG lasers to achieve excitation, but these instruments are not suitable for use in consumer products. *8. Academic development*: Much of the development of 3D optical data storage has been carried out in universities. The groups that have provided valuable input include: Peter T. Rentzepis was the originator of this field, and has recently developed materials free from destructive readout. *Watt W. Webb* co developed the two-photon microscope in Bell Labs, and showed 3D recording on photorefractive media. Masahiro Irie developed the diarylethene family of photochromic materials. [13] Yoshimasa Kawata, *Satoshi Kawata* and Zouheir Sekkat have developed and worked on several optical data manipulation systems, in particular involving poled polymer systems. 14] Kevin C Belfield is developing photochemical systems for 3D optical data storage by the use of resonance energy transfer between molecules, and also develops high 2-photon cross-section materials. Seth Marder performed much of the early work developing logical approaches to the molecular design of high 2-photon cross-section chromophores. Tom Milster has made many contributions to the theory of 3D optical data storage. Robert McLeod has examine d the use of microholograms for 3D optical data storage. Min Gu has examined confocal readout and methods for its enhancement. 9 Commercial development*: In addition to the academic research, several companies have been set up to commercialize 3D optical data storage and some large corporations have also shown an interest in the technology. However, it is not yet clear whether the technology will ever come to market in the presence of competition from other quarters such as hard drives, flash storage, holographic storage and internet-based storage. Examples of 3D optical data storage media. Top row – Written Call/Recall media; Mempile media. Middle row – FMD; D-Data DMD and drive. Bottom row – Landauer media; Microholas media in action. Call/Recall was founded in 1987 on the basis of Peter Rentzepis’ research. Using 2-photon recording (at 25 Mbit/s with 6. 5 ps, 7 nJ, 532 nm pulses), 1-photon readout (with 635 nm), and a high NA (1. 0) immersion lens, they have stored 1 TB as 200 layers in a 1. 2 mm thick disk. [23] They aim to improve capacity to 5 TB and data rates to up to 250 Mbit/s within a year, by developing new materials as well as high-powered pulsed blue laser diodes. Mempile are developing a commercial system with the name TeraDisc. In March 2007, they demonstrated the recording and readback of 100 layers of information on a 0. mm thick disc, as well as low crosstalk, high sensitivity, and thermodynamic stability. [25] They intend to release a red-laser 0. 6-1. 0 TB consumer product in 2010, and have a roadmap to a 5 TB blue-laser product. [26] *Constellation 3D* developed the Fluorescent Multilayer Disc at the end of the 1990s, which was a ROM disk, manufactured layer by layer. The company failed in 2002, but the intellectual property (IP) was acquired by D-Data Inc. who are attempting to introduce it as the Digital Multilayer Disk (DMD). Storex Technologies has been set up to develop 3D media based on fluorescent photosensitive glasses and glass-ceramic materials. The technology derives from the patents of the Romanian scientist Eugen Pavel, who is also the founder and CEO of the company. First results, 40 nm marks recorded into 3D virtual layers separated by 700 nm, were presented in October 2009 at the ISOM2009 conference. Landauer inc. are developing a media based on resonant 2-photon absorption in a sapphire single crystal substrate. In May 2007, they showed the recording of 20 layers of data using 2 nJ of laser energy (405 nm) for each mark. The reading rate is limited to 10 Mbit/s because of the fluorescence lifetime. Colossal Storage aim to develop a 3D holographic optical storage technology based on photon induced electric field poling using a far UV laser to obtain large improvements over current data capacity and transfer rates, but as yet they have not presented any experimental research or feasibility study. Microholas operates out of the University of Berlin, under the leadership of Prof Susanna Orlic, and has achieved the recording of up to 75 layers of microholographic data, separated by 4. micrometres, and suggesting a data density of 10 GB per layer. [33] 3DCD Technology Pty. Ltd. is a university spin-off set up to develop 3D optical storage technology based on materials identified by Daniel Day and Min Gu. Several large technology companies such as Fuji, Ricoh and Matsushita have applied for patents on 2-photon-responsive materials for applications including 3D optical data storage, however they have not giv en any indication that they are developing full data storage solutions. How to cite 3 D Optical Storage, Papers